2. PRESENTATION
2. Presentation
This chapter contains information you should be aware of when planning the installation.
An installation of Husqvarna Automower® includes four main components:
Automower®, an automatic lawn mower that mows the lawn by moving in essentially an irregular pattern. The mower is powered by a
Charging station, where your Automower® returns when the charge level in the battery becomes too low.
The charging station has three functions:
• To send control signals along the boundary wire.
• To send out signals so Automower® finds the charging station.
• To charge Automower® battery.
Transformer, which is connected between the charging station and a 230V wall socket. The transformer is connected to the wall socket via an integrated power cord and to the charging station via a 20 m long low voltage cable. The low voltage cable must not be extended. The low voltage cable must not be shortened nor extended.
Wire, laid in a loop around Automower®’s working area. The boundary wire is laid around the edges of the lawn and around objects and plants that the mower must not run into. The wire is also used for any guide wires. Contact your dealer to purchase a cable with the right length.
10 - English