Husqvarna 260 ACX manual Corridor width

Page 52

6. MENU FUNCTIONS

Automower® 260 ACX has a default delay setting of 2 minutes for guide 1 and guide 2 and 11 minutes for the boundary wire. A delay of

99 minutes means that the function is deactivated.

If both search methods are to be activated, it is possible for example to set 4 minutes for Guide 1 delay and Guide 2 delay and 9 minutes for Boundary delay. Automower® then searches irregularly for 4 minutes and then searches for the guide wires for 5 minutes. If by this time it has not found one of the guide wires, the mower will now search for both the boundary wire and guide wires.

If it is not suitable in the installation to follow the boundary wire, 99 minutes should be specified as the delay for the boundary wire.

It is of course possible to specify the same delay time for both the guide wires and the boundary wire, e.g. 5 minutes. Automower® then searches irregularly for 5 minutes and when it does not find the charging station, it continues to search either by following the guide wires or the boundary wire, depending on which one it reaches first. Different delay times can also be chosen for guide 1 and guide 2.

The mower does not change the search method: If the mower starts to follow the boundary wire it will not switch to follow a guide wire.

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-2

Boundary delay

Guide 1 delay

Guide 2 delay

•Corridor width (3-2-3)

The Corridor width setting defines the distances from the mower's path to the boundary wire or the guide wire when following these to/from the charging station. The area beside the wires used by the mower is called the Corridor.

A low corridor width value represents a narrow corridor while a high value represents a wide corridor. With a narrow corridor Automower® always runs close to the boundary wire respective guide wire. With a wide corridor Automower® varies how it runs, i.e. close to and further from the boundary wire respective guide wire.

Corridor width is a relative distance and is stated on a scale from 0 to 20. The lower the Corridor width value the closer Automower® follows the boundary wire and/or guide wire.

Corridor

52 - English

Page 51 Page 53
Image 52
Page 51 Page 53
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Capacity Function of AutomowerMowing technique Working method Movement pattern Search method 2 Follow boundary wire Search method 3 Follow guide wireSearch method Search method 1 IrregularOne Automower in several gardens More than one Automower in a gardenGPS communication unit Carry out the installation in the following steps InstallationPreparations Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Installation of the boundary wire Charging the batteryDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when searching for the charging station Passages when mowingSecondary areas Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Charging a discharged battery UseUsing GPS-communication Using the timerSMS feature Remarks Commands Description CommandsGPS anti-theft protection Starting Automower Stopping AutomowerSwitching off Automower Adjusting the cutting heightRestart Restart within 20 secondsControl panel Shortcuts Select Main switchNumbers Menu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerReset all timers YESStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allInstallation Reversing distanceStart angle 1 End angle 1To follow the boundary wire or a guide wire away Gardens where the front and back are joined by aPassage where the charging station cannot be When this function is activated Automower willDirection DistanceProportion Follow loopCorridor width Test Test OUT Settings Drive past wireOpen NormalPIN code Time lock4-1-2Alarm4-1-3 GPSSet time Set dateTime format Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Exit angles 70 Garden Example Maintenance BatteryService Winter storageAutomower Charging stationCleaning After winter storageUnderframe and blade disc ChassisReplacing the blades BodyTransport and moving Carbon steel 522 85 Two-toothed, turnable, extra robust 300Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Data Automower 260 ACXEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents