Husqvarna 260 ACX manual Replacing the blades, Body

Page 68

8. MAINTENANCE

Body

Use a damp, soft sponge or cloth to clean the body. If the body is very dirty it may be necessary to use a soap solution or washing-up liquid.

Take special care to keep the two ultrasonic sensors clean from dust and dirt at all times. When the sensors are covered in dirt (i.e. the sensors are not functioning), the mower will run at a much lower speed than normal in order to avoid hard collisions. The low speed could mean that the mower does not have time to finish mowing the designated area.

8.6 Replacing the blades

WARNING

Always use originalblades and screws when replacing.

Only replacing the blades and reusing the screw can result in the screw wearing during mowing and shearing off. The blades can then be thrown out and cause serious injury.

On Automower® 260 ACX five blades are screwed onto the blade disc. The blades have four edges to ensure a longer service life. Two of the edges are equally worn as the blade disc rotates alternately to the left and alternately to the right. When the edges (1 and 2) have become dull, loosen the screw and turn the knife over so that edges 3 and 4 are facing outwards.

All five blades and screws must be replaced at the same time to ensure the cutting system is balanced.

There are several different types of mower blades to choose from as accessories, with different features. Use Husqvarna AB approved blades only, see the table. Please contact your dealer for more information.

1

3

 

 

4

 

2

Blade type

Quantity/Packaging

Part number

 

 

 

 

 

 

Stainless steel

9

535 13 87-01

(two-toothed, stainless)

 

 

30

535 13 88-01

 

 

 

 

 

500

505 12 78-01

 

 

 

Carbon steel

9

535 13 87-02

(two-toothed)

 

 

30

535 13 88-02

 

 

 

 

 

500

535 12 78-02

 

 

 

68 - English

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Important Information Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualXxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Mowing technique Function of AutomowerCapacity Working method Movement pattern Search method 2 Follow boundary wire Search method 3 Follow guide wireSearch method Search method 1 IrregularGPS communication unit More than one Automower in a gardenOne Automower in several gardens Preparations InstallationCarry out the installation in the following steps Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the batteryInstallation of the boundary wire Best position for the boundary wire Boundaries for the working area Boundaries within the working area Secondary areas Passages when mowingPassages when searching for the charging station Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Charging a discharged battery UseSMS feature Using the timerUsing GPS-communication GPS anti-theft protection Description CommandsRemarks Commands Starting Automower Stopping AutomowerSwitching off Automower Adjusting the cutting heightRestart Restart within 20 secondsControl panel Shortcuts Numbers Main switchSelect Menu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerReset all timers YESStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allInstallation Reversing distanceStart angle 1 End angle 1To follow the boundary wire or a guide wire away Gardens where the front and back are joined by aPassage where the charging station cannot be When this function is activated Automower willDirection DistanceProportion Follow loopCorridor width Test Test OUT Settings Drive past wireOpen NormalPIN code Time lock4-1-2Alarm4-1-3 GPSSet time Set dateTime format Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Exit angles 70 Garden Example Maintenance BatteryService Winter storageAutomower Charging stationCleaning After winter storageUnderframe and blade disc ChassisReplacing the blades BodyTransport and moving Carbon steel 522 85 Two-toothed, turnable, extra robust 300Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Data Automower 260 ACXEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents