3. INSTALLATION
Do not position the charging station so that the mower can come closer than 3 metres behind the charging station (for example on a narrow point). The mower will not then find the charging station.
Installation and connecting the charging station
1.Position the charging station in a suitable spot.
2.Attach the charging station to the ground using the supplied screws.
3.Ensure the screws are secured all the way down in the countersink.
IMPORTANT INFORMATION
It is not permitted to make new holes in the plate. Only the existing holes may be used to secure the plate to the ground.
4.Connect the low voltage cable to the charging station.
Only use original cable and transformer.
5.Connect the low voltage cable to the transformer.
The connectors may be slightly difficult to connect, as they are
6.Connect the transformer’s power cord to a 230V wall socket. It is preferable to use an
breaker as recommended.
20 - English