Husqvarna 260 ACX manual Charging the battery, Installation of the boundary wire

Page 21

3. INSTALLATION

IMPORTANT INFORMATION

Do not tread or walk on the charging station plate.

3.3 Charging the battery

Automower® is supplied with an uncharged battery. As soon as the charging station is connected, it is possible to charge the mower.

1.Set the main switch to the OFF position.

2.Place Automower® in the charging station to charge the battery while you are laying the boundary wire.

From an uncharged state the battery takes about 1 1/2 to 2 1/2 hours until it is fully charged.

IMPORTANT INFORMATION

Automower® cannot be used before the installation is complete.

3.4 Installation of the boundary wire

The boundary wire can be installed in one of the following ways:

•Securing the wire to the ground with staples.

It is preferable to staple down the boundary cable, if you want to make adjustments to the boundary wire during the first few weeks of operation.

•Bury the wire.

It is preferable to bury the boundary wire if you want to dethatch or aerate the lawn.

If necessary both methods can be combined so one part of the boundary wire is stapled down and the remainder is buried.

English - 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method 3 Follow guide wire Search method 2 Follow boundary wireSearch method Search method 1 IrregularMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Ideal position of the charging station Installation of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Use Charging a discharged batteryUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Stopping Automower Starting AutomowerAdjusting the cutting height Switching off AutomowerRestart Restart within 20 secondsControl panel Shortcuts Main switch SelectNumbers Main menu Menu functionsBrowse between menus Number seriesAutomower Automower main menuTimer CommandsYES Reset all timersStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allReversing distance InstallationStart angle 1 End angle 1Gardens where the front and back are joined by a To follow the boundary wire or a guide wire awayPassage where the charging station cannot be When this function is activated Automower willDistance DirectionProportion Follow loopCorridor width Test Test OUT Drive past wire SettingsOpen NormalTime lock4-1-2 PIN codeGPS Alarm4-1-3Set date Set timeTime format Date formatSound Significance SoundsGarden example Proposed installation and settingsExit angles Exit angles 250 Exit angles 70 Garden Example Battery MaintenanceWinter storage ServiceAutomower Charging stationAfter winter storage CleaningUnderframe and blade disc ChassisBody Replacing the bladesCarbon steel 522 85 Two-toothed, turnable, extra robust 300 Transport and movingFault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 260 ACX Technical dataEU Declaration of Conformity only applies to Europe EU declaration of conformityPage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents