Husqvarna 260 ACX manual Alarm4-1-3, Gps

Page 57

6. MENU FUNCTIONS

•Alarm(4-1-3)

This function means that the first digit of the PIN code must be entered within 10 seconds after the STOP-button has been pressed or the mower has been lifted up for any reason. If the correct number is not entered after three attempts, the alarm sounds. The alarm can then be stopped by entering the complete PIN code.

IMPORTANT INFORMATION

The alarm can be activated on the mower using the Alarm function. It is recommended that this function is used.

To:

•Activate: Move the cursor to Alarm and press YES. Select ON to activate and press YES. Then specify for how long the alarm should sound, by answer the question Duration of alarm?.

•Deactivate: Move the cursor to Alarm and press YES. Select OFF to deactivate and press YES. When you select OFF, the alarm function is also deactivated.

•GPS (4-1-4)

GPS anti-theft protection offers increased protection and control of Automower®. If the mower is moved outside the preset protection area, you will be alerted immediately via SMS. New SMS are sent with updated location details as the Automower® is moved.

For more information on how you use this feature and which preparations are required before you can activate this function, see 3.9 Activate the GPS anti-theft protection area on page 36 and 4.3 Using GPS-communicationon page 38.

To:

•Activate GPS anti-theft protection area: Place the mower at the central point for the required protection area (see 3.9 Activate the GPS anti-theft protection area on page 36). Place the cursor at GPS and press YES. Select ON to activate and press YES. Leave the mower in the same position until the GPS unit confirms the central point by sending an SMS containing the text Circular geofence On followed by the GPS coordinates for the central point.

•Deactivate the GPS anti-theft protection area: Place the cursor at GPS and press YES. Then select NO and press YES.

PIN code

Time lock

Alarm

GPS

4-1-3

PIN code

Time lock

Alarm

GPS

4-1-4

ON

OFF

ON

OFF

_ _ _min

English - 57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method 3 Follow guide wire Search method 2 Follow boundary wireSearch method Search method 1 IrregularMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Ideal position of the charging station Installation of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Use Charging a discharged batteryUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Stopping Automower Starting AutomowerAdjusting the cutting height Switching off AutomowerRestart Restart within 20 secondsControl panel Shortcuts Main switch SelectNumbers Main menu Menu functionsBrowse between menus Number seriesAutomower Automower main menuTimer CommandsYES Reset all timersStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allReversing distance InstallationStart angle 1 End angle 1Gardens where the front and back are joined by a To follow the boundary wire or a guide wire awayPassage where the charging station cannot be When this function is activated Automower willDistance DirectionProportion Follow loopCorridor width Test Test OUT Drive past wire SettingsOpen NormalTime lock4-1-2 PIN codeGPS Alarm4-1-3Set date Set timeTime format Date formatSound Significance SoundsGarden example Proposed installation and settingsExit angles Exit angles 250 Exit angles 70 Garden Example Battery MaintenanceWinter storage ServiceAutomower Charging stationAfter winter storage CleaningUnderframe and blade disc ChassisBody Replacing the bladesCarbon steel 522 85 Two-toothed, turnable, extra robust 300 Transport and movingFault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 260 ACX Technical dataEU Declaration of Conformity only applies to Europe EU declaration of conformityPage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents