Husqvarna 260 ACX manual PIN code, Time lock4-1-2

6. MENU FUNCTIONS

Security (4-1)

•PIN code (4-1-1)

Via this function you can change your PIN code at any time.

•To change the PIN code: Move the cursor to PIN code and press YES. Place Automower® in the charging station. Enter the new PIN code and press YES. Enter the same code again to confirm, and press YES.

When the PIN code has been changed, the message PIN code changed is displayed for a few seconds. The Security menu will then appear again.

•Time lock(4-1-2)

This function partly involves Automower® stopping to mow after a predetermined number of days and not continuing until the correct PIN code has been entered, and partly that the PIN code must be entered when the main switch is set to the ON position. The default setting on Automower® is 30 days, but can be changed as required.

IMPORTANT INFORMATION

Time lock is the most important theft-prevention function. Accordingly, it is recommended to have this activated.

To:

•Activate: Move the cursor to Time lock and press YES. Now move the cursor to Number of days and press YES. Specify how many days you would like Automower® to mow before it requests the PIN code. Finish by pressing YES.

When the selected number of days has elapsed, Automower® completes mowing and charges the battery. The message Enter PIN code is then shown on the display. You then enter your code and press YES.

In addition, Automower® will now request the PIN-code each time the main switch is switched to ON.

•Deactivate: Move the cursor to Time lock and press YES. Now move the cursor to OFF and press YES.

Security

Language

Time and date

4-1

PIN code

Time lock

Alarm

GPS

4-1-2

PIN code

Time lock

Alarm

GPS

4-1-1

Number of	_ _ days
days
OFF

56 - English