Husqvarna 260 ACX manual Fault symptom

Page 72

9. TROUBLE SHOOTING

9.2 Fault symptom

If your Automower® does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer.

Symptom

Cause

Action

 

 

 

 

 

 

Uneven mowing

Automower® works too few hours per

Increase the mowing time, see 6.4

results

day.

Timer (2) on page 47.

 

 

 

 

Working area too large.

Try limiting the working area or

 

 

extending the working time, see 6.4

 

 

Timer (2) on page 47.

 

 

 

 

Dull blades.

Replace all the blades and screws so

 

 

that the rotating parts are balanced.

 

 

 

 

Long grass in relation to the set cutting

Increase the cutting height and then

 

height.

successively lower.

 

 

 

 

The mower seems to work more at the

Change the Garden shape (3-3)

 

top of a slope than at the bottom.

setting to Open.

 

 

 

 

Accumulation of grass by the blade

Check that the skid plate and blade

 

disc or around the motor shaft.

disc rotate easily. If not, the skid plate

 

 

and perhaps the blade disc must be

 

 

removed and the grass and foreign

 

 

objects removed. See 8.5 Cleaning on

 

 

page 67.

 

 

 

Automower® runs at

The clock on Automower® needs to be

Set the clock, see Time and date (4-3)

the wrong time

set.

on page 58.

 

 

 

 

The start and stop times for mowing

Adjust the start and stop time settings

 

are incorrect.

for mowing, see 6.4 Timer (2) on

 

 

page 47.

 

 

 

Automower® vibrates

Unbalanced blade disc or damaged

Inspect the blades and screws and

 

blades.

replace them if necessary.

 

 

 

Automower® runs, but

Automower® is looking for the charging

No action. The blade disc does not

the blade disc does

station.

rotate when the mower is searching for

not rotate

 

the charging station.

 

 

 

The mower mows for

Grass or a foreign object is blocking

Dismantle and clean the skid plate and

shorter periods than

the blade disc or skid plate.

blade disc.

usual between

 

 

charges

 

 

 

 

 

Both the mowing and

This behaviour is normal in high

No action.

charging times are

temperatures (gradually increasing

 

shorter than usual

above 25 °C).

 

 

 

 

Automower® starts

 

Change corridor width and/or

mowing directly

 

reversing distance.

outside of the

 

 

charging station

 

 

instead of following

 

 

the loop out

 

 

 

 

 

72 - English

Page 71 Page 73
Image 72
Page 71 Page 73
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method 2 Follow boundary wire Search method 3 Follow guide wireSearch method Search method 1 IrregularMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Charging a discharged battery UseUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Starting Automower Stopping AutomowerSwitching off Automower Adjusting the cutting heightRestart Restart within 20 secondsControl panel Shortcuts Main switch SelectNumbers Menu functions Main menuBrowse between menus Number seriesAutomower main menu AutomowerCommands TimerReset all timers YESStart time 1 Stop time 1 Start time 2 Stop time 2 Mon Tue Wed Thu Fri Sat Sun Run allInstallation Reversing distanceStart angle 1 End angle 1To follow the boundary wire or a guide wire away Gardens where the front and back are joined by aPassage where the charging station cannot be When this function is activated Automower willDirection DistanceProportion Follow loopCorridor width Test Test OUT Settings Drive past wireOpen NormalPIN code Time lock4-1-2Alarm4-1-3 GPSSet time Set dateTime format Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Exit angles 70 Garden Example Maintenance BatteryService Winter storageAutomower Charging stationCleaning After winter storageUnderframe and blade disc ChassisReplacing the blades BodyTransport and moving Carbon steel 522 85 Two-toothed, turnable, extra robust 300Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Data Automower 260 ACXEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents