Husqvarna 260 ACX manual Direction, Distance, Proportion, Follow loop

Page 51

6. MENU FUNCTIONS

•Direction

Specify to the right, left, guide 1 or guide 2 depending on which direction the area lies from the charging station. The direction is set looking from the charging station in the approach direction of the mower.

When a guide wire is installed the direction can be specified as the guide wire. The mower will now follow the selected guide wire instead of the boundary wire.

•Distance

Specify the number of metres along the boundary wire or guide wire from the charging station to the place in the remote area where the mower shall start mowing.

Tip! Use the Test OUT (3-2-5)function (see page 54) to find out how far it is to the remote area. The distance, stated in metres, will appear on the mower display.

•Proportion

Specify a value for how often of the occasions Automower® leaves the charging station it should follow the loop out to the remote area.

For example the value 20 % means that in 20 % of the occasions Automower® leaves the charging station, it does it in the direction to the remote area. In the remaining 80 % of the occasions the mower leaves the charging station according to the setting made for its function Exit angles (3-1).

If a value of 20 % is specified for Area 1 and

10 % for Area 2, the remaining 70 % is allocated to the selection under Exit angles (3-1).

•Follow loop in (3-2-2)

This function is used to control how Automower® searches for the charging station.

Automower® always starts the search for the charging station in an irregular search method. In some gardens this is not sufficient for the mower to quickly find the charging station. The search can then be optimised using the Follow loop in function.

When the mower still can not find the charging station after a specific period of irregular searching, it also starts to search for the guide wires and after a further period also the boundary wire to follow one of them into the charging station instead. This time is stated in minutes, and delays searching for guide 1, guide 2 and the boundary wire.

The delay time can be adapted to the shape of the garden in the Follow loop in function.

Area 1

Area 2

Area 3

Area 4

Area 5

Direction

Distance

Proportion

Exit angles

Follow loop

Installation shape

Advanced

3-2

Direction

Distance

Proportion

Right

Left

Guide 1

Guide 2

Follow loop out

Follow loop in

Corridor width

Test IN

Test OUT

3-2-2

English - 51

Page 50 Page 52
Image 51
Page 50 Page 52
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Xxxxxx xxxxx xxxx xxxx xxxxxImportant Information Xxxxxx xxxxx xxxx xxxx xxxxx Use Safety instructionsTransport MaintenancePresentation Automower, what’s what? Function of Automower CapacityMowing technique Working method Movement pattern Search method 1 Irregular Search method 2 Follow boundary wireSearch method 3 Follow guide wire Search methodMore than one Automower in a garden One Automower in several gardensGPS communication unit Installation Carry out the installation in the following stepsPreparations Ideal position of the charging station Installation of the charging stationImportant Information Installation and connecting the charging station Charging the battery Installation of the boundary wireDo not tread or walk on the charging station plate Best position for the boundary wire Boundaries for the working area Boundaries within the working area Passages when mowing Passages when searching for the charging stationSecondary areas Slopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire Installation Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Use Charging a discharged batteryUsing the timer Using GPS-communicationSMS feature Description Commands Remarks CommandsGPS anti-theft protection Stopping Automower Starting AutomowerRestart within 20 seconds Switching off AutomowerAdjusting the cutting height RestartControl panel Shortcuts Main switch SelectNumbers Number series Menu functionsMain menu Browse between menusAutomower Automower main menuTimer CommandsMon Tue Wed Thu Fri Sat Sun Run all Reset all timersYES Start time 1 Stop time 1 Start time 2 Stop time 2End angle 1 InstallationReversing distance Start angle 1When this function is activated Automower will To follow the boundary wire or a guide wire awayGardens where the front and back are joined by a Passage where the charging station cannot beFollow loop DirectionDistance ProportionCorridor width Test Test OUT Normal SettingsDrive past wire OpenTime lock4-1-2 PIN codeGPS Alarm4-1-3Date format Set timeSet date Time formatSound Significance SoundsGarden example Proposed installation and settingsExit angles Exit angles 250 Exit angles 70 Garden Example Battery MaintenanceCharging station ServiceWinter storage AutomowerChassis CleaningAfter winter storage Underframe and blade discBody Replacing the bladesCarbon steel 522 85 Two-toothed, turnable, extra robust 300 Transport and movingFault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 260 ACX Technical dataEU Declaration of Conformity only applies to Europe EU declaration of conformityPage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents