Husqvarna 260 ACX manual Movement pattern

Page 14

2. PRESENTATION

The control panel on the top of Automower® is where you manage all the mower settings. The main switch is also located on the control panel. Open the control panel cover by pressing down the STOP button.

When the main switch is turned ON for the first time, a start-up sequence begins which includes: selection of the language, time format, date format and four digit PIN code, plus setting of the time and date, see page 31.

The selected PIN code must then be entered each time the main switch is moved to the ON position. This theft-prevention function is called Time lock(4-1-2)and Automower® has this function activated as a default setting. The function also means that the mower stops mowing after a set number of days and will not continue until the correct PIN code has been entered. The function can be deactivated or changed as required. For more information about Time lock(4-1-2), see page 56.

Automower® can enter a sleep mode to save power. The display on the control panel is then completely dimmed.

The sleep mode is activated 25 minutes after the STOP button has been pressed and then not reset to the operating mode. Automower® is then activated by switching the main switch off and on.

The sleep mode can also be activated in the event of a fault occurring during mowing or charging and which is not rectified within 25 minutes. Automower® is then activated by pressing the STOP button.

Movement pattern

The mower’s movement pattern is irregular and is determined by Automower® itself. A movement pattern is never repeated. This mowing system means the lawn is mown equally without any mowing lines.

If Automower® enters an area where it senses the grass is longer than earlier, it can change the movement pattern. It can then mow in a square pattern to cover the area of longer grass more systematically.

When Automower® mows in a square pattern, this is known as square mode cutting. The mower must have been operational for more than 6 hours in order for Automower® to start square mode cutting.

14 - English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Husqvarna Automower 260 ACX OPERATOR’S Manual Page Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Important Information Xxxxxx xxxxx xxxx xxxx xxxxx Symbols in the Operator’s ManualXxxxxx xxxxx xxxx xxxx xxxxx Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Mowing technique Function of AutomowerCapacity Working method Movement pattern Search method Search method 2 Follow boundary wireSearch method 3 Follow guide wire Search method 1 IrregularGPS communication unit More than one Automower in a gardenOne Automower in several gardens Preparations InstallationCarry out the installation in the following steps Installation of the charging station Ideal position of the charging stationImportant Information Installation and connecting the charging station Do not tread or walk on the charging station plate Charging the batteryInstallation of the boundary wire Best position for the boundary wire Boundaries for the working area Boundaries within the working area Secondary areas Passages when mowingPassages when searching for the charging station Slopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire Installation Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Activate the GPS anti-theft Protection area Charging a discharged battery UseSMS feature Using the timerUsing GPS-communication GPS anti-theft protection Description CommandsRemarks Commands Starting Automower Stopping AutomowerRestart Switching off AutomowerAdjusting the cutting height Restart within 20 secondsControl panel Shortcuts Numbers Main switchSelect Browse between menus Menu functionsMain menu Number seriesAutomower main menu AutomowerCommands TimerStart time 1 Stop time 1 Start time 2 Stop time 2 Reset all timersYES Mon Tue Wed Thu Fri Sat Sun Run allStart angle 1 InstallationReversing distance End angle 1Passage where the charging station cannot be To follow the boundary wire or a guide wire awayGardens where the front and back are joined by a When this function is activated Automower willProportion DirectionDistance Follow loopCorridor width Test Test OUT Open SettingsDrive past wire NormalPIN code Time lock4-1-2Alarm4-1-3 GPSTime format Set timeSet date Date formatSounds Sound SignificanceProposed installation and settings Garden exampleExit angles Exit angles 250 Exit angles 70 Garden Example Maintenance BatteryAutomower ServiceWinter storage Charging stationUnderframe and blade disc CleaningAfter winter storage ChassisReplacing the blades BodyTransport and moving Carbon steel 522 85 Two-toothed, turnable, extra robust 300Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Data Automower 260 ACXEU declaration of conformity EU Declaration of Conformity only applies to EuropePage Original Instructions
Related manuals
Manual 72 pages 54.36 Kb

260 ACX specifications

The Husqvarna 260 ACX is a versatile and powerful chainsaw designed for both professionals and serious hobbyists alike. Renowned for its reliability and performance, the 260 ACX comes packed with features that cater to a wide range of cutting tasks, from tree felling to limb trimming and firewood processing.

One of the standout characteristics of the Husqvarna 260 ACX is its robust engine. It is equipped with a 50.2cc X-Torq engine that delivers a high power-to-weight ratio, ensuring efficient and powerful performance with reduced fuel consumption and lower emissions. This makes it not only eco-friendly but also cost-effective for prolonged use.

The chainsaw employs the innovative AutoTune technology, which automatically adjusts the engine's settings for optimal performance. This feature eliminates the need for frequent manual adjustments, allowing the user to maintain productivity without interruptions. The 260 ACX also comes with an Air Injection system, which helps to reduce the amount of dust and debris entering the air filter, extending its lifespan and maintaining engine efficiency.

Comfort during use is a priority in the design of the Husqvarna 260 ACX. It features an ergonomic handle with an anti-vibration system that minimizes fatigue, allowing users to work longer without discomfort. Additionally, the chainsaw has an easy-to-access chain tensioning system that simplifies the process of adjusting the chain, enhancing user convenience.

Safety is critical in chainsaw operation, and the Husqvarna 260 ACX is designed with several safety features. It includes a chain brake that activates in case of kickback, reducing the risk of injury. The chainsaw's low kickback bar and chain also contribute to safer operation, making it suitable for users of varying skill levels.

Furthermore, the 260 ACX features a durable build, incorporating high-quality materials that ensure longevity, even under demanding conditions. Its lightweight design, combined with a well-balanced construction, facilitates easy maneuverability, making it an ideal choice for both ground-level and overhead cutting tasks.

In summary, the Husqvarna 260 ACX is a reliable chainsaw that blends power, efficiency, and user comfort. With its advanced technologies, focus on safety, and versatile capabilities, it stands out as an excellent tool for anyone looking to tackle tough cutting jobs with ease and confidence.
Top Page Image Contents