Editing aMovie's First and Last Scenes
You can edit outthe first and last scenes of a movie in 1-sec. increments.
On the movie playback screen,
select [_].
The editing screen will be displayed.
Specify the part to be edited out.
Select either [_] (Cut beginning) or
[_] (Cut end), then press <8>.
Press the <41_> key to see the
previous or next frames. Holding it
down will fast forward the frames.
After deciding which part to edit out,
press <8>. The portion highlighted
in blue on the top of the screen is
what will remain.
Check the edited movie.
Select [1_] and press< _ > to playback
the portion highlighted in blue.
Tochange the editing, go back to step 2.
Tocancel the editing, select [_] and
press <_-_>.
Savethemovie.Select [[L_],then press <_>.
The save screen will appear.
Tosave it as a new movie, select
[New file]. To save it and overwrite
the original movie file, select
[Overwrite]. Then press <_-_>.
, Since the editing is done in 1-sec. increments (position indicated by
[_]), the exact position where the movie is edited may differ slightly from
the position you specified.
Ifthe card does not have enough room, [New file] wilt not be selectable.
More movie editing functions are available with ZoomBrowser EXJ
ImageBrowser (provided software, p.270).
188