Canon 100 HS, IXUS 115 HS Using the Wink Self-Timer

Detecting a Face and Shooting (Smart Shutter)

Using the Wink Self-Timer

Point the camera at a person and press the shutter button fully. The camera will shoot approximately two seconds after it detects a wink.

Choose .

zFollow Steps 1 – 2 on p. 64 to choose , then press the nbutton for more than one second.

zPress the qrbuttons to choose , then press the n button.

Compose the shot and press the shutter button halfway.

zConfirm that a green frame appears around the face of the person who will wink.

Press the shutter button fully.

XThe camera will enter shooting stand-by,

and [Wink to take picture] will appear on the screen.

XThe lamp will blink and the self-timer sound will play.

Face the camera and wink.

XThe shutter will release approximately 2 seconds after a wink is detected from the person inside the frame.

zTo cancel the countdown, press the n button.

What if a wink is not detected?

•Wink a bit slowly.

•A wink may not be detected if eyes are covered by hair or a hat, or when wearing glasses.