IBM 1120, 1125 MAC Binary PS

Argecy Computer Corporation 248-324-1800
175
MAC Binary PS
Purpose:
To configure the printer to process Macintosh binary PostScript print jobs.
Values:
NPA Mode
Purpose:
To specify whether the printer performs the special processing required for bidirectional
communication, following the conventions defined in the Network Printing Alliance (NPA) Protocol.
Values:
Note: Changing this menu item automatically resets the printer.
PCL SmartSwitch
Purpose:
To configure the printer so it automatically switches to PCLemulation when a print job received
through the USB port requires it, regardless of the default printer language.
Values:
See also:
PS SmartSwitch;Printer Language
On Printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system.
Note:This setting often causes Windows print jobs to fail.
Off Printer filters PostScript print jobs using standard protocol.
Auto* Printer accepts print jobs from computers using either Windows or Macintosh operating
systems.
On Printer performs NPA processing. If data is not in NPA format, it is rejected as bad data.
Off Printer does not perform NPA processing.
Auto* Printer examines the data to determine the format and then processes it appropriately.
On* Printer examines the data on the USB interface and selects PCLemulation if the data
indicates that is the required printer language.
Off Printer does not examine the incoming data. The printer uses PostScriptemulation to
process the job if PS SmartSwitch is On, or uses the default printer language specified in the
Setup Menu if PS SmartSwitch is Off.