Argecy Computer Corporation 248-324-1800
184
52 Removing an option card
If necessary, refer to the SetupGuide for instruction s on accessing the printer system board.
WARNING:Electronic components are easily damaged by static electricity. Touch something
metal on the printer before you touch the card.
1Locate the option you want to remove.
2Loosen and remove the two screws over and under the slot. Gently pull the card out of the
connector on the system board.
3Place the option card in its original packaging. If you did not save the packaging, wrap the card
in paper and store it in a box.
4If you need to install another option on the system board, refer to the Setup Guide.
5Refer to the Setup Guide for instructions on closing the printer system board cover.