Reattach <device>
What this message means:
The specified device is either not fully connected to the printer or is experiencing a hardware failure.
What you can do:
•Reestablish communication by removing the specified device and reattaching it to the printer.
•Press Go to clear the message and continue printing without using the device.
•If a hardware failure occurs, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service.
Res Reduced
What this message means:
The printer is reducing the resolution of a page in the current job from 600 dots per inch (dpi) to 300 dpi to prevent a 38 Memory Full error. Res Reduced remains on the display while the job prints.
What you can do:
Press Menu to open the Job Menu and cancel the current job.
Resetting the
Printer
What this message means:
The printer is resetting to the current default settings. Any active print jobs are canceled.
What you can do:
Wait for the message to clear.
99
