Samsung RF24FSEDBSR RF24FSEDBSR/EF, RF24FSEDBSR/EG, RF24FSEDBSR/EO, RF24FSEDBSR/ES FREEZER DOOR, DISASSEMBLING THE, RE-ASSEMBLINGTHE FLEX DOOR

RE-ASSEMBLING THE FLEX DOOR

To reattach the flex doors, assemble parts in reverse order.

Be sure to connect the Flex Door Wire CAUTION Connector.

If it is not connected, the Flex Room does not work.

DISASSEMBLING THEFREEZER DOOR

1.Take out the upper drawer by lifting it up.

2.Remove the freeze room guard ( 1 ) by lifting the guard up.

Be careful not to scratch or dent the CAUTION sliding rail by letting it strike the floor.

Make sure that you mount the freezer CAUTION basket in the right position when removing

/installing the freezer door. Failing to do so may result in the door not opening or closing properly.

Putting too much food into the freezer

CAUTION drawers can prevent the freezer from closing completely and can cause frost build-up.

setting01 up

1

3. Take out the lower basket ( 2 ) by lifting the basket up from the rail system.

2

4.Press the fixing hook of the rail system.

5.Holding the top of the Freezer Drawer, pull it out all the way, and then remove it from the rail system.

setting up _19

DA68-02916G-12.indb 19 2016. 3. 24. �� 8:20