1. Manuals
  2. Brands
  3. Kitchen Appliance
  4. Refrigerator
  5. Samsung
  6. Kitchen Appliance
  7. Refrigerator

Samsung RF24FSEDBSR RF24FSEDBSR/EF, RF24FSEDBSR/EG, RF24FSEDBSR/EO, RF24FSEDBSR/ES FREEZER DOOR, RE-ASSEMBLINGTHE, ADJUSTING THE LEVEL, MAKING MINOR ADJUSTMENTS TO THE DOORS

1 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160
Download on canonical page 160 pages, 42.1 Mb
RE-ASSEMBLING THE

FREEZER DOOR

To reattach the drawer after you have moved the fridge to its final location, assemble the parts in reverse order.

ADJUSTING THE LEVEL

Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side.

How to adjust the level

1.Open the freezer drawer and remove the lower basket.

2.Insert a flat-blade screwdriver (-) into the notch on the left control lever, and turn it counter- clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator.

Fixed part

Adjustment

part

The left door is fixed. To make minor door adjustments, adjust only the right door.

1.Pull out the flex door ( 1 ) to reveal the lower hinge ( 2 ).

2.Insert a philips screwdriver (+) ( 3 ) into the shaft ( 4 ) of the lower hinge.

3.Adjust the height by turning a philips screwdriver (+) ( 3 ) clockwise ( DOWN ) or counterclockwise ( UP ).

When you turn a philips screwdriver (+)

counterclockwise ( ), the door will move up.

flat-bladescrewdriver (-) ControlLever

Both control levers must be touching the CAUTION floor to avoid possible personal injury or

property damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

1

2

4

It is difficult to remove the cover leg

3

3

front from the refrigerator, so we do not

 

 

recommend making small adjustments

 

 

with the control lever. Instead, refer to the

 

 

next page for the best way to make minor

 

 

adjustments to the doors.

 

 

20_ setting up

DA68-02916G-12.indb 20

2016. 3. 24. �� 8:20

MENU

Models

Contents