Panasonic PTAE8000U manuals

110 pages17.95 Mb

LCD Projector
- Thank you for purchasing this Panasonic product.
Operating Instructions
- Model No. PT-AE8000U
- Functional Manual
  - 22 - ENGLISH
  - 3ENGLISH - 3
    - - Information Preparation Getting Started Basic Operation Settings Maintenance Appendix
      - Important
- 4Contents
  - Important Information
  - Preparation
    - About your projector ....................................... 18
  - Getting Started
    - Setting up .......................................................... 21
    - Connections ......................................................26
  - Basic Operation
    - Switching the projector on/off ....................... 28
    - Projecting an image .........................................31
    - Remote control operation ............................... 32
    - Viewing 3D Images ..........................................35
  - Settings
    - Menu navigation ...............................................37
    - [PICTURE] menu .............................................. 40
    - [POSITION] menu .............................................60
  - 5
    - Important
    - Index .................................................................109
      - PreparationGetting StartedBasic OperationSettingsMaintenanceAppendix
  - Contents
    - [3D SETTINGS] menu ......................................64
    - [LENS CONTROL] menu .................................73
    - [OPTION] menu ................................................77
  - Maintenance
    - TEMP and LAMP Indicators ............................85
    - Care and replacement .....................................87
  - Appendix
    - Using VIERA Link .............................................96
    - Technical information ....................................100
    - Specications .................................................106
- 6Read this rst!
  - 7FCC NOTICE (USA)
  - NOTIFICATION (Canada)
    - 8Important
    - POWER
    - 9Important
    - ON USE/INSTALLATION
    - 10Important
    - ACCESSORIES
    - Important
  - 11CAUTION:
    - POWER
    - ON USE/INSTALLATION
    - ACCESSORIES
    - Important
  - 12CAUTION:
    - Viewing 3D video
    - Use of 3D Eyewear (optional)
  - 13Brazil Only Brasil Apenas
    - - 1. Pressione a guia e levante a tampa. 2. Remova as baterias.
    - Manuseio de baterias usadas
      - BRASIL
    - Remoo das baterias
- 14Precautions for use
  - Cautions when transporting
  - Cautions when installing
    - 15 When using an infrared communications device
    - Installation precautions
  - 16Cautions on use
    - In order to view clear video images
    - Do not touch the surface of the projection lens with bare hands.
    - About LCD panels
    - About optical components
    - About the lamp
  - About disposal
  - 17Accessories
  - Optional accessories
  - Remote control
    - Top Front
- 18About your projector
  - 19Projector body
    - Control panel
    - Top and front view
    - 20 Back and bottom view
    - Connecting terminals
- 21Setting up
  - Projection method
  - Parts for ceiling mount (optional)
  - 22Projection related
  - 23Front adjustable feet and throwing angle
  - 24Lens shift and positioning
    - Adjusting the lens shift
      - 1) Remove the lens shift cover.
      - 4) Rotate the lens shift lever clockwise to x. 5) Attach the lens shift cover.
    - 25 Projector location range
  - Connections
- 26Connections
  - DVD player Video player DVD player
  - Before connecting to the projector
    - Caution
  - Connecting example: COMPONENT IN/S-VIDEO IN/VIDEO IN
  - 27Connections
  - Connecting example: HDMI IN/COMPUTER IN
    - 3D IR Transmitter
    - Computer
    - Blu-ray player
    - - To RGB output To HDMI output
      - HDMI cable (commercially available)
      - Computer cable (commercially available)
  - 3D IR Transmitter (optional accessory) connection
    - IR cable (included with 3D IR Transmitter)
- 28Switching the projector on/off
  - Power cord
    - Connecting Fully insert until the tabs on the left and right make a click sound.
    - Disconnecting Pull out while pushing on the tabs on the sides.
  - Power indicator
  - 29Switching on the projector
    - Check external device connections before switching the projector on. Power indicator
    - |
    - 5) Press the power
      - 4)
      - 3) 5)
    - 4) Remove the lens cover.
  - 30Switching off the power
  - Projecting an image
- 31Projecting an image
  - Selecting the input signal
    - 1) Switch on the external devices.
    - 2) Switch the video input.
  - Adjusting the image
    - 1) Adjust the angle of the projector.
    - 2) Remove the lens shift cover.
    - 4) Adjust the lens shift.
- 32Remote control operation
  - You can operate the projector with the remote control within a range of 7 m (23').
  - zOperating by pointing at the projector
  - zFacing to the screen
  - Managing the lens control settings
  - Selecting the picture mode
    - You can switch to your desired picture mode settings.
    - The settings change as follows each time the button is pressed.
  - Adjusting the picture
    - Switchable setting items from the [PICTURE] menu of the on-screen menu can be displayed in a list.
  - 33Loading a saved setting
  - Displaying the [VIERA LINK] menu
  - Displaying the waveform monitor
  - Resetting to the default settings
  - 34Submenu
  - Switching the input signal
  - Using the <FUNCTION> button
    - Allocating operations to the <FUNCTION> button
      - 2) Hold the <FUNCTION> button on the remote control down for at least 3 seconds.
  - Displaying the [3D SETTINGS] menu
  - Viewing 3D Images
- 35Viewing 3D Images
  - About viewing 3D images
    - Viewing 3D images
      - Using the projector menu controls, set so that 3D images are shown.
      - 1) Wearing the 3D Eyewear
      - 2) View
      - 3) After Use
  - 36Viewing 3D Images
  - Communication range of a 3D IR Transmitter and 3D Eyewear
    - 35
    - Screen 3D Eyewear Approx. 5 m (16'5") Approx. 4 m (13'1")
    - Approx. 4 m (13'1")
    - The diagram above shows the communication range under the following conditions:
      - Screen 6 m
  - Cautions when using 3D Eyewear
- 37Menu navigation
  - Navigating through the menu
    - Default setting
    - Current setting
    - Operating procedure
      - 1) Press the <MENU> button on the remote control or in the controls of the projector.
      - 2) Press the buttons to select main menu items.
      - 4) Press the buttons to select the submenu item you wish to alter, then press the
      - to switch settings/adjust.
    - Returning adjusted values to default settings
  - 38Menu list
    - [PICTURE]
    - [POSITION]
    - 39 [LANGUAGE]
    - [3D SETTINGS]
    - [LENS CONTROL]
    - [OPTION]
- 40[PICTURE] menu
  - [PICTURE MODE]
  - [CONTRAST]
  - [BRIGHTNESS]
  - [COLOR]
  - [TINT]
  - 41[COLOR TEMPERATURE]
  - [SHARPNESS]
  - [DYNAMIC IRIS]
  - [WAVEFORM MONITOR]
    - 42 [MONITOR POSITION]
      - Switch settings Switch settings
    - [AUTO ADJUST]
      - 2) Press the buttons to select the required item.
        Automatic waveform adjustment items
      - 5) Select [OK] with the
      - buttons. 6) Press the <ENTER> button.
    - Adjust the waveform
      - 431) Adjust [FULL SCAN(Y)] / [SINGLE LINE SCAN(Y)].
      - 2) Adjust [FULL SCAN(R)] / [SINGLE LINE SCAN(R)].
      - 3) Adjust [FULL SCAN(G)] / [SINGLE LINE SCAN(G)].
      - 4) Adjust [FULL SCAN(B)] / [SINGLE LINE SCAN(B)].
  - 44[SPLIT ADJUST]
    - 2) Press the buttons to select [AREA SELECT] and then press the <ENTER>
    - 3) Use the
    - buttons to select the area to be adjusted.
    - 5) Press the <MENU> button and make adjustments with the [PICTURE] menu.
    - 8) Press the <RETURN> button.
  - 45[ADVANCED MENU]
    - You can perform more detailed image adjustment manually.
    - Press the <ENTER> button
    - [GAMMA ADJUSTMENT]
      - 3) Press the buttons to select [START ADJUSTMENT], and press the <ENTER> button.
      - 46(A)
        [-0.40] [-0.35][+0.75] [+0.80] [R: 0.00 G: 0.00 B: 0.00]
        The information of the currently selected point (A) is displayed.
        48Move above
        Reference points (gray)
      - 50 Initialize the gamma adjustment results
      - Adjusting the gamma (when [SIMPLE] is selected for [ADJUSTMENT MODE])
    - 51 [CONTRAST]
    - [BRIGHTNESS]
    - [NR]
    - [MPEG NR]
    - [FRAME CREATION]
    - 52 [COLOR MANAGEMENT]
      - Create a new prole
      - zAdjusting the selected color (when [CURSOR] is selected for [ADJUSTMENT MODE])
      - 53
      - zAdjusting the selected color (when [RGBCMY] is selected for [ADJUSTMENT MODE])
      - Editing/deleting logs
      - 55 Saving a log setting as a prole
      - Deleting a prole
      - Changing a prole name
      - Loading saved proles
    - 56 [x.v.Color]
    - [DETAIL CLARITY]
    - 57 [CINEMA REALITY]
    - [SUPER WHITE]
    - [TV-SYSTEM]
    - [RGB/YCBCR], [RGB/YPBPR]
      - When using COMPUTER input
      - When using an HDMI 1/2/3 input
  - 58[PICTURE MEMORY]
    - [MEMORY SAVE]
      - Values set (adjustment values) for videos can be saved as favorites.
      - 1) Press the buttons to select the number to be saved and press the
      - 2) Select [OK] with the
      - buttons.
      - 4) Press the buttons to specify the location of the required character and
      - 5) Press the buttons to select [OK]. 6) Press the <ENTER> button.
    - [MEMORY LOAD]
      - You can access the details saved through [MEMORY SAVE].
      - 1) Press the buttons to select the memory name to be called.
    - [MEMORY DELETE]
      - You can delete memory entries.
      - 1) Press the buttons and select the memory name to be deleted.
    - [MEMORY NAME CHANGE]
      - You can edit the memory name settings.
      - 1) Press the buttons and select the memory name to be changed.
      - 4) Press the buttons to select [OK]. 5) Press the <ENTER> button.
  - 59SIGNAL MODE
- 60[POSITION] menu
  - [H-POSITION]
  - [V-POSITION]
  - [DOT CLOCK]
  - [CLOCK PHASE]
  - 61[ASPECT]
    - When a VIDEO/S-VIDEO signal is input
    - When a COMPUTER (RGB) signal is input
    - HDMI
    - COMPONENT signal (YCBCR/YPBPR) / COMPUTER (RGB) signal
  - 63[WSS]
  - [OVER SCAN]
  - [KEYSTONE]
  - [AUTO SETUP]
- 64[3D SETTINGS] menu
  - [SCREEN SIZE]
  - [3D INPUT FORMAT]
    - 2) Select the 3D format with the
  - 66[LEFT/RIGHT SWAP]
  - [3D PICTURE BALANCE]
    - Adjustment method
      - 1) Press the buttons and select the item for adjusting the right eye video.
      - 2) Use the buttons to change the value.
    - 67 [3D WAVEFORM MONITOR]
      - zThe [3D WAVEFORM MONITOR] menu is displayed.
      - 2) Press the buttons to select the required item and press the <ENTER>
      - 3) Select the [MOVE LINE].
    - [PICTURE BALANCE MEMORY]
      - z[PICTURE BALANCE MEMORY] menu is displayed.
      - [PICTURE BALANCE MEMORY SAVE]
        Balance values set for videos (setting values) can be saved as favorites.
        1) Press the buttons to select [MEMORY SAVE] and press the <ENTER> button.
        zThe [PICTURE BALANCE MEMORY SAVE] screen is displayed.
        : Memory with data already stored : No data stored
        2) Press the buttons to select the number to be saved and press the <ENTER> button.
        zThe [PICTURE BALANCE MEMORY SAVE] conrmation message is displayed.
        PICTURE BALANCE MEMORY SAVE SAVE THE ADJUSTED VALUE AS MEMORY 1. CANCELOK
        3) Select [OK] with the buttons. 4) Press the <ENTER> button.
        z[PICTURE BALANCE MEMORY NAME INPUT] screen is displayed.
      - 68 [PICTURE BALANCE MEMORY LOAD]
      - [PICTURE BALANCE MEMORY DELETE]
      - [PICTURE BALANCE MEMORY NAME CHANGE]
  - 69[2D TO 3D]
  - 70[3D EYEWEAR BRIGHTNESS]
  - [3D IR TRANSMITTER]
  - 71[3D VIEWING MONITOR]
    - 1) Press the buttons to select [MODE1] - [MODE3], and press the <ENTER>
    - 2) Press the buttons to select the optimum parallax.
  - 72[3D MOTION REMASTER]
  - [3D SAFETY PRECAUTIONS]
- 73[LENS CONTROL] menu
  - [ZOOM/FOCUS]
    - [ZOOM/FOCUS] test pattern 1 is displayed. Adjust so that the pattern size and focus are correct.
    - Test pattern 1
    - 1) Press the buttons to adjust the [ZOOM] and to adjust the [FOCUS].
      - Test pattern 2
    - 3) Press the <RETURN> button or <MENU>
  - [LENS MEMORY LOAD]
    - 1) Press the buttons to select the memory name to be recalled.
  - 74[LENS MEMORY SAVE]
    - 1) Press the buttons to select the memory to be saved.
    - 6) Press the buttons to select [OK]. 7) Press the <ENTER> button.
  - [LENS MEMORY EDIT]
    - You can delete memory entries and edit the memory name settings.
    - [LENS MEMORY DELETE]
      - 1) Press the buttons and select the memory name to be deleted.
    - [LENS MEMORY NAME CHANGE]
      - 1) Press the buttons to select the memory name to be changed.
      - 4) Press the buttons to select [OK]. 5) Press the <ENTER> button.
  - 75[AUTO SWITCHING]
  - 76[H-AREA POSITION]
  - [V-AREA POSITION]
  - [LEFT MASKING AREA]
  - [RIGHT MASKING AREA]
  - [UPPER MASKING AREA]
  - [LOWER MASKING AREA]
  - [PROCESSING MESSAGE]
- 77[OPTION] menu
  - [ON-SCREEN DISPLAY]
    - [INPUT GUIDE]
    - [OSD DESIGN]
    - [OSD POSITION]
  - [BACK COLOR]
  - 78[STARTUP LOGO]
  - [AUTO SEARCH]
  - [HDMI SIGNAL LEVEL]
  - [FRAME RESPONSE]
  - [PROJECTION METHOD]
  - 79[TRIGGER 1/2 SETTING]
    - [OUTPUT]
    - [INPUT]
      - 1) Use the buttons to select [TRIGGER 1 SETTING] or [TRIGGER 2 SETTING] and
      - 2) Press the buttons to select the input/output function and press the
  - 80[SLEEP]
  - [HIGH ALTITUDE MODE]
  - 81[LAMP POWER]
  - [FUNCTION BUTTON]
    - How to cancel function assignment
      - 2) Select [OK] with the buttons.
  - [VIERA LINK SETTINGS]
    - [VIERA LINK]
    - 82 [POWER ON LINK]
    - [POWER OFF LINK]
    - [ENERGY SAVING MODE]
    - [UNUSED DEVICE ENERGY SAVE]
  - 83[OTHER FUNCTIONS]
    - [FREEZE]
    - [BLANK]
    - [VIERA LINK]
    - INPUT SELECT
      - 1) Use the buttons to place the cursor on the input to be switched.
  - [TEST PATTERN]
  - [LAMP RUNTIME]
  - 84[INITIALIZE ALL]
  - TEMP and LAMP Indicators
- 85TEMP and LAMP Indicators
  - Managing the indicated problems
    - Temperature indicator <TEMP>
  - 86TEMP and LAMP Indicators
    - Lamp indicator <LAMP>
- 87Care and replacement
  - Before cleaning the projector / replacing components
  - Cleaning the projector
    - Cleaning the outer surface of the projector
    - Cleaning the lens surface
    - Air lter unit
      - 1) Remove the air lter cover.
      - 2) Remove the air lter unit.
      - 3) Vacuum dirt and dust from the air lter unit.
  - 89Component replacement
    - Air lter and electrostatic lter
    - Lamp unit
    - Before replacing the lamp unit
    - 90 When to replace the lamp unit
    - 91 Lamp unit replacement procedure
    - 93 Attaching the top cover
  - Troubleshooting
- 94Troubleshooting
  - The picture is fuzzy.
  - No picture appears.
  - The color is pale or grayish.
  - The remote control does not work.
  - The picture does not display correctly.
  - Picture from a computer does not appear.
  - Video from HDMI compatible device does not appear or it appears jumbled.
  - 3D video is disrupted while viewing a 3D video.
  - Ceiling mount bracket safeguards
- 95Ceiling mount bracket safeguards
- 96Using VIERA Link
  - Summary of VIERA Link features
    - VIERA Link (HDMI connection only)
    - VIERA Link Control of compatible equipment
  - 97VIERA Link HDAVI Control
    - Preparations
    - 98 Using [VIERA LINK]
      - 4) Use the menu of the device.
- 100Technical information
  - List of compatible signals
  - 101Supported 3D video signal list
  - 102Serial terminal
    - Connection
    - Pin assignments and signal names
    - Communication settings
    - Basic format
    - 103 Cable specications
      - (When connected to a personal computer)
    - Control commands
      - 105<Inquiry commands>
- 106Specications
  - 108Dimensions
    - Unit: mm
  - Index
- 109Index
  - Numbers
  - A
  - B
  - C
  - D
  - E
  - F
  - G
  - H
  - I
  - K
  - L
  - M
  - N
  - O
  - P
  - R
  - S
  - T
  - U
  - V
  - W
  - X
  - Z
  - 110

Panasonic PTAE8000U manuals

Panasonic PTAE8000U User Service

Panasonic PTAE8000U Manual