3Com 3500 appendix Before You Begin

Install the System

Quick Installation Guide 3

Before You Begin

3Before you install the system:

■Move the system close to where you plan to install it, and close to a power receptacle.

■Have a No. 2 Phillips screwdriver available.

■Have the hardware kit available. See Table 2.

Table 2 System Hardware Mounting Kit

Item	Qty	Use in
Rubber feet (self-adhesive)	4	Installing the system on a table top
Mounting brackets	2	Installing the system in the distribution
		rack
8-32 x 1/2 Phillips flat-head	8	Installing the distribution rack mounting
screws		brackets
10-32 x 1/2 Phillips pan-head	4	Installing the system in the distribution
screws		rack

Determine whether you are installing the system on a tabletop or in a distribution rack.

For complete installation instructions, see the chapter on “Installing the System” in the Getting Started Guide.

WARNING: Hazardous energy exists within the system. Always be careful to avoid electric shock or equipment damage. Many installation and troubleshooting procedures should be performed only by trained technical personnel.