SFP Operation 27
Figure 5 Inserting an SFP Transceiver
5Use an appropriate cable to connect the transceiver to a suitable device.
6Check the LEDs on the front of the Switch to ensure that it is operating
correctly. Refer to “LEDs” on page13 for more information.
Removing an SFP
Transceiver
If you wish to remove the transceiver (it is not necessary to power-down
your Switch):
1Disconnect the cable from the transceiver.
2Move the wire release lever downwards until it is pointing toward you.
3Pull the wire release lever toward you to release the catch mechanism;
the transceiver will then easily slide out.
Product
label
Suitable port
on host Switch
DUA1745-0AAA03.book Page 27 Friday, April 8, 2005 12:34 PM