Example top-level command line interface menu | 3Com 3CR17451-91

Manually Configuring IP Information

35

2At the login and password prompts, enter admin as your user name and press Return at the password prompt. If you have logged on correctly, the top-level menu of the command line interface is displayed as shown in the example in Figure 8.

Figure 8 Example top-level command line interface menu

3At the Select menu option prompt you can either:

■enter the protocol ip basicConfig command. At the Enter configuration method prompt enter manual. The screen prompts you to enter IP information.

or

■enter the gettingStarted command. At the Enter configuration method prompt enter manual. The screen prompts you to enter IP information.

4Enter the IP address, subnet mask, and gateway IP address for the Switch. The screen displays a summary of the information entered.

If using the gettingStarted command you will then be prompted to enter system information, change passwords, and then given the option to carry out advanced configuration.

The initial set up of your Switch is now complete and the Switch is ready for you to set up your chosen management method. See “Methods of Managing a Switch” on page 39.

If you do not intend to use the command line interface via the console port to manage the Switch, you can logout, disconnect the serial cable and close the terminal emulator software.

Image 37

3Com 3CR17451-91, 3CR17450-91 manual Example top-level command line interface menu

Contents

SuperStack 3 Switch 3870 Family Getting Started Guide United States Government Legend 3Com Corporation Campus Drive Marlborough MA USA Contents Setting UP for Management PIN-OUTS Page About this Guide Icon Description ConventionsConvention Description Documentation RelatedDocumentation documentation Comments To access the online documentation from the CD-ROM 3870 Switch Hardware Features Switch Front View Detail Switch 1000BASE-T Ports Stacking Status LED Color Indicates Port Status/Packet LEDsStack Master LED Fault LED Power/Self Test LEDColor Indicates Module LEDs Unit LED View Detail Duplex Mode Feature Switch Port StatusType of Unit Total Units in the Stack Maximum Modules Port Port Speed Default Settings Introducing the Superstack 3 Switch Installing the Switch Choosing a Suitable Package ContentsSite To rack-mount your Switch Power lines and fluorescent lighting fixturesSwitch, as shown in Figure Rack-mounting Fitting a bracket for rack-mounting Repeat steps 2 and 3 for the other side of the Switch Powered-up and ready for operation Power-upSwitch Sequence Cross-over Cable Straight-through Cable Power System output SFP Operation Remove the plastic protective cover if fitted Transceiver Your SwitchRemoving an SFP Installing the Switch Setting UP for Management Overview Setting Up Automatic IP Configuration Manual IP Configuration Setting UP for Management Pre-requisites Manually Configuring IP Information Setting Up the Switch with IP Information Connecting the Workstation to the Switch Example top-level command line interface menu Viewing Configured IPAutomatically Viewing Automatically Configured IP Information Viewing IP Information via the Console Port Refer to Setting Up Command Line Interface Management on Interface Management Command LineWeb Interface Management Where xxx.xxx.xxx.xxx is the IP address of the Switch Network Using Telnet Interface Setting Up WebChoosing a Browser Over the Network Default Users Setting Up SnmpPasswords Security Device User Modify operation on the web interface User Default Access Level Name Password Problem Solving Power/Self Test LED does not light Solving ProblemsOn powering-up, the Power/Self Test LED remains yellow Indicated by LEDs Refer to the list of suggested solutions below ProblemsSolving Hardware Port Status LED is flashing green/yellow Unit fails or Snmp thermal shutdown trap is received Fan failure warning message is received Error message indicating that the SFP transceiver is faulty Solving Communication ProblemsIP Addressing How do you obtain a registered IP Address? Solving Software Upgrade Problems Problem Solving Safety Information This must be approved for the country where it is used Power Cord Set Japan Important Safety Information Important Safety Information Class ’information de Sécurité Importante ’information de Sécurité Importante Dispositif Laser De Classe Vorsicht Europe Wichtige Sicherheitsinformationen Laser Gerät der Klasse Información de seguridad importante Schuko Appendix a Safety Information CSA Importanti Informazioni di Sicurezza Solo Regno Ważne informacje o zabezpieczeniach Appendix a Safety Information Laser Produkt Klasa Appendix a Safety Information Null Modem Cable RJ-45 to RS-232 25-pin PC-AT Serial CableRJ-45 to 9-pin RJ-45 Pin Assignments Modem CableRJ-45 to RS-232 25-pin Pin Number 10/100 1000 Pin Number 10/100 1000 Appendix B PIN-OUTS Switch 3870 24 Port Switch 3870 48 Port Services Product to Gain Service BenefitsRegister Your Purchase Downloads Access SoftwareContact Us Telephone Technical Australia 800 678 Philippines US and Canada Telephone Technical Support and Repair Index SFP Page Chapter Index Regulatory Notices