Connecting the Router

19

Figure 5 Connecting the Gateway

Power

Supply Unit

ADSL 11g Wireless Router

Wireless

Users

Your PC

3Run the provided telephone cable from the wall jack providing ADSL service to the ADSL port on your ADSL Router. When inserting an ADSL RJ-11 plug, be sure the tab on the plug clicks into position to ensure that it is properly seated. If you are using splitterless ADSL service, add low-pass filters between the ADSL wall jack and your telephones. (These filters pass voice signals through but filter data signals out.)

Either:

If you are using a full-rate (G.dmt) connection, your service provider will attach the outside ADSL line to a data/voice splitter. In this case you can connect your phones and computer directly to the splitter as shown below (Figure 6):

Page 19
Image 19
3Com 3CRWE754G72-A, 3CRWE754G72-B, WL-540A, WL-540B manual Either, Connecting the Gateway