3Com 3CRWE754G72-A, WL-540A, WL-540B manual Connection Type Connection Type Screen

44CHAPTER 5: ROUTER CONFIGURATION

3Enter the key for the RADIUS server in the RADIUS Key field.

4By default, the WPA keys are changed every hour, but if you wish to change this you can do so by specifying the required time in the Re-key Interval field, in minutes

5Click Apply.

Internet Settings From these pages you can configure the settings for your DSL connection.

Connection Type Figure 30 Connection Type Screen

The Connection Type screen is used to configured the parameters for your DSL connection. The information necessary to complete these screens should be obtained from your ISP.

First, select the DSL connection mode from the four options available:

■PPPoE - PPP over Ethernet, providing routing for multiple PCs (see page 45)

■PPPoA - PPP over ATM, providing routing for multiple PCs (see page 46)

■Bridge Mode (for a single PC) - RFC1483 Bridged Mode, for single PCs only (see page 47)

■Routing Mode over ATM - RFC1483 Routed Mode, for multiple PCs (see page 47)

Click Next.