Cabling 1000BASE-SX Ports
To cable one of the
1Read the Caution at the beginning of “Cabling Gigabit Ethernet Ports” earlier in this chapter.
2Remove the dust covers and save them for future use.
3Examine the port and connector pair for dust. Verify that nothing blocks the light transmission between the port and its connectors.
4Attach one male connector of the SC cable connector pair to the right side of a fixed Gigabit Ethernet port.
5Attach the remaining connector of the SC cable connector pair to the left side of the Gigabit Ethernet port.
6To cable another port, repeat steps 1 through 4.
When you cable GBIC transceivers, notice that the SC Receive (RX) port is on the left and the SC Transmit (TX) port is on the right. See Figure 9.
Cabling Gigabit Ethernet Ports | 21 |
Figure 5 shows cabling for the 1000BASE-SX ports.
Figure 5 Cabling the 1000BASE-SX Port
3C94024 |
|
|
|
|
|
|
|
|
|
| 1000BASE SX |
|
|
| R |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| PCKT |
TX | 1 | RX | TX 2 RX | TX | 3 | RX | STAT |
| |||||||
|
|
| 1000BASE SX |
|
|
|
|
TX | 4 | RX | TX 5 RX | TX | 6 | RX | 13 |
|
|
| 1000BASE SX |
|
|
| |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| PCKT |
TX | 7 | RX | TX 8 RX | TX | 9 | RX | STAT |
| |||||||
|
|
| 1000BASE SX |
|
|
|
|
TX | 10 | RX | TX 11 RX | TX | 12 | RX | 19 |
SC connector
Fiber cables
