DUA1860-0AAA01
Spanning Tree Configuration 3-7
Port: Text Field. Enter the name of the port who's spanning tree
parameters you want to change. Use 1, 2, 3 or E.
ID: Display Field. The identification number for the port. The
port's ID is the same as the bridge's ID, which is a combination of
two numbers, the bridge priority and the Ethernet address of the
bridge.
State: Display Field. The current status of the port. This value
changes depending on when you view it, or when you enable or
disable a port.
Blocked indicates the port is listening for spanning tree
information only. The port ignores all other information.
Listening indicates the port is waiting to be placed in the
forwarding state.
Learning indicates the port is learning information collected
during the listening state. The forwarding database is buil t from
learned information.
Forwarding indicates the port is sending data.
MOS (Manually Out of Service) indicates the port is disabled and
receives no network traffic. Ports are enabled or disabled by the
PORT IS ENABLED/DISABLED field.
Port ID: Display Field. The hexadecimal number that un iquely
identifies the port. This number is a combination of the port
priority and the physical number of the port in the bridge. This
number changes if you change the PRIORITY field.