3-10 CHAPTER 3: ADVANCED BRIDGING
DUA1860-0AAA01
Setting Up A Host-to-Host Filter Set
Select CONFIGURATION from the Main Menu. Select BRIDGES
from the Configuration menu. Select BRIDGE FILTERS from the
Bridges menu.
The Bridge Filters menu lists each filter option. Selecting the
relevant filter will take you through to that filter's setup screen.
Select HOST-TO-HOST from the Bridge Filters menu.
The Host-to-Host screen appears, as shown in Figure 3-3. You use
this screen for setting up host-to-host filter sets. The screen
displays the devices included in the filter set denoted in the SET
NUMBER field. Simply alter this field to work on a different filter
set. There are 32 host-to-host filter sets. Remember that filter set
number 1 is reserved for absolute exclusion.
For host-to-host filtering information, refer to Filter Sets on page
1-23.
Figure 3-3 Host-to-Host