3Com DUA1860-0AAA01, LINKBUILDER MSH 4 PORT ETHERNET BRIDGE MODULE - page 210

A-2 CHAPTER A: LINK SETTINGS
DUA1860-0AAA01
We recommend that the link method is only used when VT100
management is not possible, for example, when you've forgotten
your password, as this method involves physically removing and
installing the module twice. For information on resetting the
module via VT100, see Erasing All Changes on page 2-27.
To reset the bridge module:
1Remove the module from the LinkBuilder MSH chassi s.
2Change the link to the reset position, see Figure A-2.
Figure A-2 The Link In The Reset Position
3Install the module into the LinkBuilder MSH chas sis.
4When the module has finished its self-test (self-test is indicated by
the PWR LED flashing), remove it from the LinkBuilder MSH
chassis.
5Change the link to the normal position, see Figure A-3.
Figure A-3 The Link In The Normal Position
6Install the module into the LinkBuilder MSH chas sis. The module is
now reset to its default settings.