2-52 CHAPTER 2: GETTING STARTED
DUA1860-0AAA01
IP Address / Host Name: Text Field. The host to which traps
pertaining to the community name are to be sent. Specify either
an IP address in the dotted decimal notation (nnn.nnn.nnn.nnn),
or the name of the host that has been defined in the host table
(via the IP Host Table screen).
If you enter a host name defined in the host table, the
corresponding IP address is displayed preceding the name. This
occurs as soon as you enter or change a community name on
some other line on the screen.
If you enter a host name not defined in the host table, an error
message is displayed, "Illegal Internet Address".
If you enter an IP address that happens to be defined in the host
table (although this is not required), the corresponding host name
is displayed (in parenthesis) after the address. This occurs as soon
as you enter or change a community name on another line on the
screen.
The default is 0.0.0.0 (unknown).
Changes to this field are only saved during a bridg e reset, and
take effect from then on.
Port: Text Field. The UDP port on the host that is to receive trap
messages. You usually leave this as the default of 162, the
standard UDP port for SNMP communication. Changes to this
field are only saved during a bridge reset, and take effect from
then on.