DUA1860-0AAA01
Custom Filter Configuration 3-21
permit/deny: Text Field (permit / deny). Denote whether you
want the protocols listed as members of the filter set to be
forwarded (permitted) or filtered (denied). Enter permit to
forward all packets with protocols listed as members, or deny to
filter all packets with protocols listed as members. The default is
deny with no protocols listed as members.
MEMBER: Text Field (1 / 0). Move to the field, under MEMBER,
next to the relevant protocol family. Enter 1 to include to protocol
family as a member of the filter set, or 0 to exclude the protocol
family as a member of the filter set. The default is 0.
Help lists the protocol IDs of the members of each family.
ADDITIONAL PROTOCOLS: Text Field. Enter an individual
protocol's type to make it a member of the filter set. You can
have up to 16. The format is nnnn (hexadecimal). The individual
protocol filters are blank by default, 0000.
For 802.3 networks, the protocol type is a Link-level Service
Access Point (LSAP), a hexadecimal number between 1 and 255.
For 802.3 networks you can also enter SNAP types, which are the
same as Ethernet types. For Ethernet, the protocol type is the
value of the type field in the Ethernet frame, a two-byte
hexadecimal number.