2 Introduction
ServerView is a software package that monitors all important server functions such as the hard disk, fans, power supply and temperature and reports the measured values on a central monitoring console.
You can run ServerView Integration in NetView on Windows 2000, Windows 2003 and Windows XP. ServerView Integration lets you use the functionality of ServerView and IBM Tivoli NetView at a central administration system.
2.1Overview
The Fujitsu Siemens PRIMERGY servers are shown in the map of NetView. Following installation of ServerView Integration in NetView you can administer the PRIMERGY servers from the central management console:
–They appear as graphic symbols on the NetView map.
–Incoming traps are displayed in the Event Browser.
–Automatic reactions to traps can be configured and triggered.
–Values of MIB variables can be queried, saved, and analyzed periodically.
The integration of ServerView Integration in NetView offers the following benefits:
–Management investments already made are unaffected.
–All devices on the network are presented in a centrally managed map.
–The overall status of a device, which can be determined in the context of other managers, is shown.
–The same methods are used to display, monitor, and evaluate all managed devices in order to support rapid and, if required, automatic response to failures.
–Network components and their resources are used efficiently.
–Maximum performance and minimum failure times ensure an optimum cost/benefit ratio.
Integration in Tivoli NetView | 7 |
