Configuration and Operation | Configuring with the Map Application |
5.1.2Selection Name
The Map application automatically assigns the selection name of the ServerView component symbol, which depends on the selection name of the parent server.
INeither the selection name of the server, nor the selection name of the ServerView component symbol should be changed manually.
If, however, it is absolutely necessary for the selection name of a Fujitsu Siemens server to be changed, proceed as follows:
ÊSelect the menu item Misc – Extended Discovery – Reset selected Fujitsu Siemens Server for the relevant Fujitsu Siemens server. This deletes the ServerView component symbol from the submap of the server and sets the symbol type to a default value other than FujitsuSiemens.
ÊChange the selection name of the server.
ÊChange the symbol type of at least one of the symbols for this server back to FujitsuSiemens. This causes the Map application to regenerate the ServerView component symbol (with a corresponding selection name).
Integration in Tivoli NetView | 35 |
