3M 800a manual To reduce the risk associated with hazardous voltage

3-SAFETY(continued)

3.3 Table of Warnings

WARNING

•To reduce the risk associated with mechanical and electrical hazards:

−Read, understand, and follow all safety and operating instructions before operating or servicing the case sealer.

−Allow only properly trained and qualified personnel to operate and service this equipment.

Figure 3-2

WARNING

•To reduce the risk associated with hazardous voltage:

−Position electrical cord away from foot and vehicle traffic.

WARNING

•To reduce the risk associated with pinches, entanglement and hazardous voltage:

−Turn electrical supply off and disconnect before performing any adjustments, maintenance or servicing the machine or taping heads.

WARNING

•To reduce the risk associated with pinches and entanglement hazards:

−Do not leave the machine running while unattended.

−Push the machine off when not in use.

−Never attempt to work on any part of the machine, load tape, or remove jammed boxes from the machine while the machine is running.

Figure 3-3

Figure 3-4

Important! Cavity in the conveyor bed. Never put your hands inside any part of the machine while it is working. Serious injury may occur (Figure 3-4).

800a-NA

6

2011 August