3M 800a manual Specifications Tape, Box Size Capacities, Taping Head Dimensions

Specifications

1.Tape:

For use with Scotch® pressure-sensitive film box sealing tapes.

2.Tape Width:

36mm or 1-1/2 inches minimum to 48mm [2 inches] maximum.

3.Tape Roll Diameter:

Up to 405mm [16 inches] maximum on a 76.2mm [3 inch] diameter core. (Accommodates all system roll lengths of Scotch® film tapes.)

4.Tape Application Leg Length - Standard:

70mm ± 6mm [2-3/4 inches ±1/4 inch]

Tape Application Leg Length - Optional:

50mm ± 6mm [2 inches ± 1/4 inch] (See "Adjustments – Tape Leg Length.")

5.Box Size Capacities:

For use with center seam regular slotted containers.

Length –	443mm [17.44 inches]		w/ Guard
Height –	406mm	[16 inches]	w/ Guard
Width –	107mm	[4.2 inches]

When upper and lower taping heads are used on “3M-Matic”case sealers, refer to the respective instruction manual specifications for box weight and size capacities.

6. Operating Rate:

Conveyor speeds up to 0.5 m/s [100 feet per minute].

7.Operating Conditions:

Use in dry, relatively clean environments at 5° to 40°C [40° to 105°F] with clean dry boxes.

Important – Taping heads should not be washed down or subjected to conditions causing moisture condensation on components.

8.Taping Head Dimensions:

Length	–	442mm [17	3/8 inches]
Height	–	648mm [25	1/2 inches] (with tape drum)
Width	–	105mm [4-1/8 inches] (without mounting spacers)
Weight	–	Packaged: 8.6kg [19 lbs.] Unpackaged: 7.7kg [17 lbs.]
			(Specifications continued on next page.)
AccuGlide 3 - 2" - NA			6	2012 January