8e6 ProxyBlocker Quick Start Guide 33
Network: LAN Settings
From the navigation panel, click Network and choose LAN Settings from the pop-up
menu:
Make the following entries for the ProxyBlocker in the LAN Settings window:
A. Enter the Host Name that includes your domain name, for example PBASERVER.
myserver.com (the NetBIOS name must be capitalized). It is important to enter
something identiable, because once the product is registered, this host name is
used by 8e6 Technologies to recognize your account for library updates. This name
needs to be a valid DNS entry.
B. Enter the LAN1 IP address and specify the subnet for LAN 1, the ProxyBlocker’s rst
Ethernet Network Interface Card (NIC).
You may use a non-routeable IP address for the listening interface and a subnet
mask of 255.255.255.255 (32 bites).
C. Enter the LAN2 IP address and subnet for LAN 2, the ProxyBlocker’s second Ether-
net NIC. The subnet selection is usually 255.255.0.0 (16 bites) or 255.255.255.0 (24
bites), but cannot be 255.255.255.255 (32 bites).
D. Enter the Primary IP address of the rst DNS name server. The ProxyBlocker uses
this name server to resolve the domain name requested by users from the LAN.