System Status Screen
The System Status screen contains the following information:
•LAN1 (eth0) interface for web access and R3000 communications: LAN1 (eth0) IP address and netmask specified in screen 3 (Configure Network Interface), and current status (“Active” or “Inactive”)
•LAN2 (eth1) interface for bandwidth monitoring: LAN2 (eth1) IP address and netmask specified in screen 4 (Configure Network Interface), and current status
(“Active” or “Inactive”)
•Default gateway IP address specified in screen 5 (Configure default gateway)
•Configure host name specified in screen 7 (Configure Host Name)
•DNS server IP address(es) specified in screen 6 (Configure Domain Name Servers)
•Current status of the Threat Analysis Reporter
•Current Version of the Threat Analysis Reporter software
NOTE: Modifications can be made at any time by returning to the specific screen of the wizard.
Log Off, Disconnect the Peripherals
A.After completing the wizard setup procedures, return to the System Configuration screen and press 9 to log out.
B.Disconnect the peripherals from the Threat Analysis Reporter.
28 | 8e6 Threat Analysis Reporter Quick Start Guide |
