A&D 1WMPD4002313 manual Function list

6-2. Function list

Item	Function number		Description
	Š C01- 0	CAL switch enabled,	0	key enabled	Do not set
Calibration	C01- 1	CAL switch disabled,	0	key disabled
					“C01-1”
	C01- 2	CAL switch enabled,	0	key disabled
	Š C02- 0	6 kg (15 lb)
	C02- 1	15 kg (35 lb)
	C02- 2	30 kg (70 lb)
Capacity	C02- 3	60 kg (150 lb)
	C02- 4	150 kg (350 lb)
	C02- 5	300 kg (700 lb)
	C02- 6	600 kg (1500 lb)
	C02- 7	1500 kg (3500 lb)
Weighing display	C03- 0	kg, g			See “11-1.
unit	Š C03- 1	kg, g, lb, oz, lb-oz			Capacity ...”.
Power-on-zero	C04- 0	±10% of the capacity			OIML R76 / NTEP
range	Š C04- 1	±50% of the capacity
Internal use	Š C05- 0	Do not change.
Decimal	Š C06- 0	. (point)
separator	C06- 1	, (comma)
Tare clear by	Š C07- 0	ZERO does not clear tare weight
ZERO operation	C07- 1	ZERO clears tare weight			OIML R76
Tare operation	C08- 0	Tare weight is rounded to the weight			NTEP
(Net weight		display count
calculation)	Š C08- 1	Internal count is used for TARE weight.			OIML R76
Preset tare	C09- 0	Function disabled
function	Š C09- 1	Function enabled
lb-oz unit	C10- 0	lb-oz disabled
	Š C10- 1	lb-oz enabled
ZERO operation	Š C11- 0	±2% of the capacity
range	C11- 1	Up to the capacity
	Š C12- 0	“f02” setting specifies the resolution.
Display resolution	C12- 1	Fixed to “f02-0” (1/3,000~1/3,500)
	C12- 2	Fixed to “f02-1” (1/6,000~1/7,500)
	C12- 3	Fixed to “f02-2” (1/12,000~1/15,000)
Auto-tare function	C13- 0	Function disabled			C13-0 deletes
	Š C13- 1	Function enabled			“f21” ~ “f23”.

ŠFactory setting

11