A&D 1WMPD4002313 manual Print/Ent

No.	NAMES	FUNCTIONS / OPERATION
5	COMPARISON INDICATORS	Indicates the results of the weight comparison
		LO (RED), OK (GREEN) and HI (YELLOW).
6	STABLE ANNUNCIATOR	Turns ON when the weight reading is STABLE.
7	ZERO ANNUNCIATOR	Turns ON when the weight is in the center of
		ZERO range.
8	NET ANNUNCIATOR	Turns ON when the display shows the NET
		weight.
9	PT ANNUNCIATOR	Turns ON when the display shows the preset tare
		weight.
10	PRINT ANNUNCIATOR	Turns ON for a moment when the weight data is
		sent by the	PRINT/ENT	or auto-printing.
11	PRECAUTION AGAINST	Turns ON when the optional battery is getting
	LOW BATTERY	close to low battery.
12	ON/OFF Key	Turns the power on or off. When turned on,
		the power-on zero will work.
	ZERO / ± Key	Zeroes the indicator when the weight is stable.
		Or the key switches the sign “+” & “-”.
	TARE Key	Zeroes the display and switches to net weight
		mode when the weight is plus and stable.
	PT Key	The key is used to enter a tare weight via the
		10-key pad.
	SAMPLE / 9 Key	To register the sample weight as a target.
		Or the numeric key 9 in the data entry.
	KEY / 8 Key	To enter a target weight via the 10-key pad.
		Or the numeric 8 in the data entry.
	RECALL / 7 Key	To recall target weight and/or HI/LO limits.
		Or the numeric 7 in the data entry.
	HI / 6 Key	To enter comparator HI limit via the 10-key pad.
		Or the numeric 6 in the data entry.
	LO / 5 Key	To enter comparator LO limit via the 10-key pad.
		Or the numeric 5 in the data entry.
	STORE / 4 Key	To store target weight and/or HI/LO limits.
		Or the numeric 4 in the data entry.
	DISP. / 3 Key	Switches the analog sweep display modes.
		Or the numeric 3 in the data entry.
	UNITS / 1 Key	To select the desired weighing unit.
		Or the numeric 1 in the data entry.
	PRINT / ENT Key	To send a data string through the optional
		interface. Or to ENTER the numeric data.
	C Key	The key to clear an incorrect data entry from the
		numeric keypad.
	0 and 2 Keys	The numeric keys 0 and 2.

9