A&D 1WMPD4002313 manual Additional Information, OP-03 RS-232C, Circuit diagram

9. ADDITIONAL INFORMATION

This section describes the additional functions and corrections to the instruction manual of FS-iseries (WM+PD4001332 and 1WMPD4001368) which are common to the FS-D.

9-1. F-Function list

The following function settings are added (“11-2. Function list” in WM+PD4001332).

Item	Function number		Description
Serial interface		f06- 5	Multi-connection with print key mode	The UFC format
Data output			(RS-422/485)
mode				is applicable to
		f06- 6	Auto-print mode + data & OK
				f06-2 to 4.
		f06- 7	Auto-print mode +/- data & OK
Zero tracking		f13- 0	Zero tracking OFF	Setting C04-0,
	Š	f13- 1	Zero tracking ON, 0.5d/sec
				f13-2 and 3
		f13- 2	Zero tracking ON, 1.0d/sec
				cannot be set.
		f13- 3	Zero tracking ON, 2.0d/sec
Auto-tare	Š	f21- 0	Auto-tare function disabled.
function		f21- 1	Auto-tare function enabled.
Auto-tare timing		f22- 0	Immediately after OK and stable
		f22- 1	0.5 sec. after OK and stable	Timing to tare
	Š	f22- 2	1.0 sec. after OK and stable
				automatically
		f22- 3	1.5 sec. after OK and stable
				after the comp.
		f22- 4	2.0 sec. after OK and stable
				OK and weight
		f22- 5	2.5 sec. after OK and stable
				stable.
		f22- 6	3.0 sec. after OK and stable
				To be used with
		f22- 7	4.0 sec. after OK and stable	f21-1.
		f22- 8	5.0 sec. after OK and stable
		f22- 9	6.0 sec. after OK and stable
Auto-tare for the	Š	f23- 0	Function disabled	Automatic
initial weight		f23- 1	Tares the initial (container) weight.	operation.
Normal/Negative	Š	f24- 0	Normal comparison
comparison		f24- 1	Negative comparison for take-away

ŠFactory setting

9-2. OP-03 RS-232C

The followings are the corrections and the additional information for the optional interface (“2-2.OP-03 Specifications” and “2-3. Command Mode” in 1WMPD4001368).

Circuit diagram

4	Signal ground SG	4	Signal ground SG
5	Shield	5	Frame ground FG
6	Frame ground FG	6	Shield
	15