Command | H | I | , | + | 0 | 0 | 1 | 0 | 0 | CR | LF |
|
|
|
|
|
|
|
|
|
|
| |
Reply | H | I | , | + | 0 | 0 | 1 | 0 | 0 | CR | LF |
|
|
|
|
|
|
|
|
|
|
| |
Command | L | O | , | + | 0 | 0 | 1 | 0 | 0 | CR | LF |
|
|
|
|
|
|
|
|
|
|
| |
Reply | L | O | , | + | 0 | 0 | 1 | 0 | 0 | CR | LF |
Assume 2 decimal place number. 1.00% will be set as LO limit %.
Assume 2 decimal place number. 1.00% will be set as LO limit %.
Store the comparator limits into the specified memory number. (No reply for
Reply
H I
,
0 1
,
+ 0 0 1 2 0 0
,
+ 0 0 0 9 0 0 CR LF
Reply
M L
,
0 1
,
+ 0 0 1 2 0 0
,
+ 0 0 0 9 0 0 CR LF
9-3. OP-04 RS-422 / 485
The followings are the corrections and the additional information for the optional interface.
Circuit diagram | 5 | Shield | 5 | Frame ground FG |
| ||||
| 6 | Frame ground FG | 6 | Shield |
The frame ground and the shield are connected internally and there is no difference between them in use.
Multi-connection with Print key mode (new function)
This is one of the applications when a PC and more than one
1.Set the Function
2.Weigh something and wait for the STABLE indicator to turn on (the indicator having
3. Press the PRINT key, the indicator will temporarily store the weight data and turn the PRINT indicator on.
The indicator does not accept the PRINT key while the PRINT indicator on.
4.Send the “@##S” command to the indicators from the PC.
5.The indicator
The address ## = 23
A request for weight data.
Command
Reply
Reply
@ | 2 | 3 | S | CR | LF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
@ | 2 | 3 | S | T | , | + | 0 | 0 | 1 | 2 | . | 3 | 4 | 5 | _ | k | g | CR | LF | |
@ | 2 | 3 | I | CR | LF |
|
| The indicator does not have any stored data to send. | ||||||||||||
While the PRINT indicator is on, the indicator will send back “@##I” to commands other than “@##S” command.
17
