A&D 1WMPD4002313 manual Setting Up the Indicator, Parameter Settings and Calibration

4-4. Setting Up the Indicator

	Earth
Clamp	terminal
Clamp
Display stand	To the wall
	Display stand
Earth terminal	(Wall-mounting bracket)

‰ Connect the main power cord to an outlet that has an earth ground terminal. You may use the earth terminal on the rear side of the display to ground the indicator.

‰If necessary, adjust the viewing angle of the display by loosening the 2 clamps, changing the angle and re-tightening the clamps.

‰The Display stand can be secured on a table or flat surface using screws (not supplied). It can be also used as a wall-mounting bracket. See “11-3. Dimensions” about the dimensions of the mounting holes.

4-5. Parameter Settings and Calibration

When a platform scale is initially set up, it is necessary to set some parameters and calibrate it using a calibration weight.

See “6. FUNCTION PARAMETER SETTINGS” to set parameters and “7. CALIBRATION” to calibrate the scale.

7