A&D AD-1191 instruction manual Default Table, Custom Menu

Default Table

Below is a table showing the possible values for the Custom and Configuration menu parameters. The values shown in bold type are the default settings.

Custom Menu

T/D Format	1	- None
	2	- MM/DD/YY_hh:mm_?M
	3	- MM/DD/YY hh:mm ?M DOW
	4	- MM/DD/YY hh:mm
	5	- MM/DD/YY hh:mm DOW
	6	- DD-MM-YY hh:mm ?M
	7	- DD-MM-YY hh:mm ?M DOW
	8	- DD-MM-YY hh:mm
	9	- DD-MM-YY hh:mm DOW
	10	- DD-MON-YY hh:mm ?M
	11	- DD-MON-YY hh:mm ?M DOW
	12	- DD-MON-YY hh:mm
	13	- DD-MON-YY hh:mm DOW
Auto T&D	1	- NO (no print after CR)
	2	- YES (print after CR)
Auto SEQ#	1	- NO (no print after CR)
	2	- YES (print after CR)
Zero	1	-	Ø	Zero with slash
	2	-	0	Zero without slash
Pound	1	- #		U.S. pound symbol
	2	-	£	British pound sterling
symbol
Underscore	1	-	_	Underscore
	2	-	➔	Left arrow
Busy Invert	1	-	Non-inverted busy (CTS)
	2	-	Inverted busy
Online/Offline 1		-	switch function enabled
	2	-	switch function disabled
Ext Ch Set	1	- NO (no extended char. set)
	2	-	YES
Print Ready	1	-	Print “Ready” message
	2	-	Don’t print “Ready” message

Configuration Menu

Baud	1	- 300
	2	-	600
	3	- 1200
	4	- 2400
	5	-	4800
	6	-	9600
	7	-	19200
Data Bits	1	-	7
	2	-	8
Parity	1	-	ODD (none if data bits = 8)
	2	-	EVEN (none if data bits=8)
Stop Bits	1	-	1
	2	-	2
Handshake	1	- None
	2	-	BUSY-LINE	(serial only)
	3	-	BUSY-BUFF	(serial only)
	4	-	XON/XOFF-LINE	(serial only)
	5	-	XON/XOFF-BUFF (serial only)
Columns	1	- 24
	2	-	32
	3	-	40
Inver	1	-	No (non-inverted printing)
	2	-	YES (inverted printing)
Font Type	1	-	5x8 font
	2	-	5x5 font

Magnification 1 - No magnification

2- Double width

3- Double height

4- Double width, double height

2 6