A&D MF-50, ML-50, MS-70, MX-50 1. 1.1., 1. This manual and Marks This manual and MarksThis manual and Marks, This manual and Marks ,

1.
1.1.
1. This manual and Marks
This manual and MarksThis manual and Marks
This manual and Marks
All safety messages are identified by the following, “ WARNIN G ” or “ CAUTION ”, of
ANSI Z535.4 (American National Standard Institute: Product Safety Signs and
Labels). The meanings are as follows:
WARNI NG
A potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
A potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
This is a hazard alert mark.
This mark is the IEC417 mark for "Caution. Hot surface".
Do not touc h parts aff ixed wit h this ma rk without adequate protection.
This mark informs you about the operation of the product.
This manual is subject to change without notice at any time to improve the product.
Product specifications are subject to change without any obligation on the part of
the manufacturer.
Under the copyright laws, the instruction manual and the software (program)
described in it are copyrighted, with all rights reserved.
The software may be installed into one computer and may not be installed into other
computers without the prior written consent of A&D Company. Copying includes
translation into another language, reproduction, conversion, photocopy and offer or
loan to another person.
The purchaser may make one copy of the software for backup purposes.
The manual and the software may not be copied, in whole or part, except as
described above.
Windows is a registered trademark of the Microsoft Corporation.
2004 All rights reserved.