A&D MF-50, ML-50, MS-70, MX-50 - page 24

MS-70 / MX-50 / MF-50 / ML-50 22
1. Turn on the analyzer.
The gram unit (of weighing mode) is displayed.
Enter the Quick Mode
Enter the Quick ModeEnter the Quick Mode
Enter the Quick Mode
2. Press the SELECT key to display an ana lysis
mode and press the ↓ or ↑ key to select quc .
Select ACCURACY
Select ACCURACYSelect ACCURACY
Select ACCURACY
3. Press the SELECT key to select ACCURACY.
When ACCURACY is selected, HI, MID. or LO blinks.
4. Press the ↓ or ↑ key to select LO of ACCURACY.
Set Drying Temperature at the Sample Pan
Set Drying Temperature at the Sample PanSet Drying Temperature at the Sample Pan
Set Drying Temperature at the Sample Pan
5. Press the SELECT key to s e lect the drying
temperature.
6. Press the ↓ or ↑ key to set 130 °C.
Store Parameters and Finish the Operation
Store Parameters and Finish the OperationStore Parameters and Finish the Operation
Store Parameters and Finish the Operation
7. Press the ENTER key to store the parameters.
The weighing mode is automatically displayed.
Put
Put Put
Put a
a a
a Sample on the Pan
Sample on the PanSample on the Pan
Sample on the Pan
8. Put the breeze break ring, pan support, pan handle
and sample pan in order. (With no sample.)
9. Close the heater cover.
10. When displaying a stable value, Press the RESET key.
Avoid mechanical vibration, breeze and environmental
noise during measurement. If it deviates from zero
display, press the RESET key.
Close
Preparation
Quick mode
ACCURACY
Temperature
Quick drying
ML-50 does not display