A&D MF-50, ML-50, MS-70, MX-50 14.1.1. 14.1.1.14.1.1., 14.1.1. Operation, Operation ,

MS-70 / MX-50 / MF-50 / ML-50 61
14.1.1.
14.1.1.14.1.1.
14.1.1. Operation
OperationOperation
Operation
1. Display the gram unit (of the weighing mode).
2. Press and hold the SE LECT key to enter the function table.
Select an Item
Select an ItemSelect an Item
Select an Item
3. Select an item using the following keys.
Example: Data output mode prt is selected.
SELECT key ... Selects a figure.
ENTER key ..... Enters to the selected item.
RESET key ..... Cancels the operation and
returns to the weighing mode.
Select a Parameter
Select a ParameterSelect a Parameter
Select a Parameter
4. Select a parameter using the following keys.
Example: Auto print mode prt 1 is selected.
↓, ↑ key ............ Selects a parameter.
ENTER key ..... Stores the parameter and proceeds
to the next item.
RESET key ..... Cancels the operation and returns
to the weighing mode.
5. If you want to finish the operation, press the
RESET key to return to the weighing mode.
Example, Use Comma for Decimal Point
Example, Use Comma for Decimal PointExample, Use Comma for Decimal Point
Example, Use Comma for Decimal Point
1. Press and hold the SE LECT key to enter the function table.
2. Press the SELECT key to d isplay dp .
3. Press the ENTER key to enter the item.
4. Press the ↓ or ↑ key t o disp lay dp "1 .
5. Press the ENTER key to store the new parameter.
6. Press the RESET key to return to the weighing
mode.
dp
0.,000g
0.000g
Cl adj
dp 0
dp 1
prt
Last parameter
New parameter
0.000g
Cl adj
0.000g
prt "0
data
prt
prt "1
Last parameter
Item
New parameter