A&D MF-50, ML-50, MS-70, MX-50 15.3.15.3., 15.3. Factory Settings Factory SettingsFactory Settings, Factory Settings ,

MS-70 / MX-50 / MF-50 / ML-50 64
15.3.
15.3.15.3.
15.3. Factory Settings
Factory SettingsFactory Settings
Factory Settings
This function can set the following parameters to factory settings.
All measurement programs
All results stored in memory function.
All parameters of the function table
ID number is reset to 0000000.
Order of calendar and date.
15.3.1.
15.3.1.15.3.1.
15.3.1. Operation
OperationOperation
Operation
1. Turn on the analyzer. The gram unit (of the weighing
mode) is displayed.
2. Press and hold the SELECT key to enter the function
table.
3. Press the SELECT key to d isplay Clr .
4. Press the ENTER key to enter the item.
5. Press the ↓ or ↑ key to display Clr "g"o .
Caution
If pressing the ENTER key with Clr
ClrClr
Clr """"n
nn
n"o
"o"o
"o and
pressing the RESET key, operation is canceled.
6. Press the ENTER key to reset.
And end is displayed.
7. Press the RESET key to return to the weighing mode.
0.000g
Cl adj
Clr
Clr "n"o
Clr "g"o
end
0.000g
Cl adj