3.Connect the MBU power adapter to the MBU, and plug-in the other end to an active power outlet (preferably a continuous power outlet without a switch to interrupt its power).

MBU

Reset DC9-20V

LAN

Line

Phone socket to power socket

The POWER LED on the MBU lights up steady and the I-NETLED flashes as the MBU proceeds to power up.

When the power cycle is complete, the I-NETLED goes out, the POWER LED lights up steady, and then the I-NETLED lights up steady indicating the MBU has obtained an IP address and is ready to be configured.

I-Net LED

Power LED

Note: The Call LED lights up steady during incoming or outgoing VoIP and landline calls.

Installing the MBU 400

MBU 400 Installation Guide 15

Page 33
Image 33
Aastra Telecom MBU 400TM manual Net LED Power LED