Location and Function of Parts

1 Plug

4 Tally indicator (rear)

 

Viewfinder cable

2 Stopper

 

3 Tally indicator (front)

5 Eyecup

6 Diopter adjustment ring

Viewfinder barrel

Bottom panel (see page 7(E))

Side panel (see page 6(E))

Front panel (see page 4(E))

1Plug

Connect to the VF connector on the camera.

2Stopper

Prevents the viewfinder from coming off the camera when it is slid from side to side.

3Tally indicator (front)

Lights up when the camera receives a tally control signal. Set the TALLY switch on the front panel (see page 4 (E)) to OFF when not in use. The brightness can also be adjusted with the TALLY switch.

4Tally indicator (rear)

Lights up when the camera receives a tally control signal. This indicator can be covered when not in use.

5Eyecup

Blocks external light while you are shooting. Over time the eyecup may become cracked. If this occurs, it should be exchanged.

Sony part number: 3-776-341-01

6Diopter adjustment ring

Turn this until the image is sharpest for your eyesight.

3(E)