1PEAKING control

Turning this control clockwise adjusts the picture sharpness, and makes focusing easier. This control has no effect on the output signals of the camera.

This control is enabled or disabled depending on the position of setting switch 3 on the bottom panel.

When switch 3 is set to OFF (factory default) :

This control is enabled only when the SEL1/SEL2 switch 4 is set to SEL1.

When switch 3 is set to ON: This control is enabled only when the picture is not magnified.

2CONTR control

Adjusts the contrast of the screen. This control has no effect on the output signals of the camera.

This control is enabled only when the SEL1/SEL2 switch 4 is set to SEL1.

3BRIGHT control

Adjusts the brightness of the screen. This control has no effect on the output signals of the camera.

This control is enabled only when the SEL1/SEL2 switch 4 is set to SEL1.

4SEL1/SEL2 switch

The setting of this switch determines whether the BRIGHT, CONTR, and PEAKING controls on the side panel or the BRIGHT/CONTR/PEAKING adjustment screws on the front panel are enabled.

SEL1 (factory default setting): Side panel controls are enabled.

SEL2: Front panel adjustment screws are enabled. However, when setting switch 3 on the bottom panel is set to ON, the PEAKING control and the PEAKING adjustment screw are switched according to the setting of the MAG button on the front panel, regardless of the SEL1/SEL2 setting.

For details, see “1 PEAKING control” (this page) and “5 BRIGHT/CONTR/PEAKING adjustment screws” (see page 5 (E)).

Bottom Panel1Setting switches

The 8 switches (1 to 8 from left) select the following settings when they are set to OFF (top side) or ON (bottom side). (The underlines show the factory default settings.)

OFF (top side)

ON (bottom side)

Switch 1

Selects whether to enable all of the indicators in the upper and lower sections of the LCD screen, or only the BATT indicator.

OFF: Enable all indicators.

ON: Enable the BATT indicator only.

Switch 2

Selects switching to B&W display priority or to grayscale display priority by the B&W button on the front panel.

OFF: Priority given to B&W display.

ON: Priority given to grayscale display.

For details, see “B&W button” (see page 5 (E)).

Switch 3

Selects whether the PEAKING adjustment screw on the front panel and the PEAKING control on the side panel should work together with the MAG button on the front panel or the SEL1/SEL2 switch on the side panel.

OFF: Work together with the SEL1/SEL2 switch.

ON: Work together with the MAG button.

This allows you to use different peaking settings for magnified and normal display.

7(E)