Location and Function of Parts
The following table shows the relationship between switch 3 settings and the times when the PEAKING control and the PEAKING adjustment screw are enabled and disabled.
| Switch 3 OFF | Switch 3 ON | ||
|
|
|
|
|
| SEL1/SEL2 switch | MAG button | ||
|
|
|
|
|
| SEL1 | SEL2 | ON | OFF |
PEAKING |
|
| (Magnified | (Normal |
|
| display) | display) | |
|
|
|
|
|
Control | Yes | No | No | Yes |
|
|
|
|
|
Screw | No | Yes | Yes | No |
(Yes: Enabled, No: Disabled)
Switch 4
Selects whether the magnified section of the picture is fixed as the center section or can be selected from the upper left, upper right, lower left, lower right, and center sections.
OFF: Selectable from among the 5 sections.
ON: Fixed as the center section.
In this case, the display automatically returns to normal about 5 seconds after the MAG button is pressed.
Switch 5
This switch is provided for service purposes. Normally it should be left in the OFF position.
Switches 6 to 8Adjust color temperature.
Switch |
| Color temperature | |
|
|
|
|
6 | 7 | 8 |
|
OFF | OFF | OFF | Factory default (approx. 6500K) |
|
|
|
|
ON | OFF | OFF | Decreases approx. 500K (becomes |
|
|
| reddish) |
|
|
|
|
OFF | ON | OFF | Increases approx. 500K (becomes |
|
|
| bluish) |
|
|
|
|
ON | ON | OFF | Increases approx. 1000K (becomes |
|
|
| bluish) |
|
|
|
|
OFF | OFF | ON | Increases approx. 1500K (becomes |
|
|
| bluish) |
|
|
|
|
Note
Color temperature does not change except by the above switch combinations. The screen display luminance decreases as a result of color temperature adjustment.
Protects the setting switches 1 against moisture and foreign objects.
Over time the cover may become cracked. If this occurs, it should be exchanged.
Sony part number:
Note
To protect the setting switches, always replace the cover after setting the switches.
8(E)