Attaching the Viewfinder to a Camera

Slide rail

2 Slide guide

 

Left-right positioning ring

3

Stopper

4

1

 

5

Plug

VF connector

1 Loosen the left-right positioning ring on the camera.

2 Insert the slide guide which is located on the front of the camera into the slide rail which is located on the back of the viewfinder.

3 Slide the viewfinder in the direction of the arrow.

4 Position the viewfinder by sliding it from side to side, and tighten the left-right positioning ring on the camera.

5 Connect the plug to the VF connector on the camera.

Note

Always check to be sure that the plug is firmly inserted into the camera’s VF connector.

Detaching the viewfinder

To detach the viewfinder from the camera, conduct the attachment procedure in reverse. When removing the viewfinder from the camera, pull up the stopper.

Note about loading in carrying case

When loading the camera with viewfinder attached into a carrying case, make sure that the camera and the viewfinder fit into the case without having to be forced. Applying undue pressure can result in damage to the camera or viewfinder.

9(E)